Rear Wheel Bearing
|
Genuine Toyota Rear wheel halfshaft bearing. For models with rear disc brakes.
|
RA031 |
£19.50 ex VAT
£23.40 inc VAT
|
|
Info
|
|
Rear inner axle seal
|
Inner Shaft seal. Fits into axle casing.
|
RA001 |
£3.00 ex VAT
£3.60 inc VAT
|
|
Info
|
|
Outer half shaft seal
|
Outer halfshaft seal, fits between wheel bearing and backing plate.
|
RA002 |
£5.00 ex VAT
£6.00 inc VAT
|
|
Info
|
|
Half Shaft/ Bearing Retainer collar
|
Rear wheel bearing retaining collar. Fitted between the snap ring and rear wheel bearing. Press fit.
We only sell the high grade "Heat shrunk" collar as per original fitment spec, afteral, this is what holds your rear wheel bearing/half shaft in place!
|
RA009 |
£11.00 ex VAT
£13.20 inc VAT
|
|
Info
|
|
Rear hub "O" ring
|
Rear Hub 'O' Ring
|
RA003 |
£1.00 ex VAT
£1.20 inc VAT
|
|
Info
|
|
Rear half shaft retainer snap ring
|
Rear half shaft retainer snap ring, prevents the retainer collar from moving on the half shaft and inturn keeps the wheel bearing in position. Quite often this snap ring spreads out of shape when changing the rear wheel bearing. |
RA027 |
£1.70 ex VAT
£2.04 inc VAT
|
|
Info
|
|
Wheel Nut with Washer
|
Chrome Wheel nut with washer as used on Genuine Alloy wheel fitments, has a washer attached to the nut. 12mm x 1.5mm
|
RA015 |
£1.80 ex VAT
£2.16 inc VAT
|
|
Info
|
|
Wheel Nut Standard Taper
|
Chrome wheel nut for steel or after market alloys that use a standard taper nut fitment, 12mm x 1.5mm thread. Style of wheel nut may vary from time to time due to current supply. Sold Individually.
|
RA016 |
£1.50 ex VAT
£1.80 inc VAT
|
|
Info
|
|
Rear anti-roll bar link
|
Rear anti-roll bar link, fits to the end on the rear anti-roll bar and connects to the bracket on the side of the chassis. We sell the link complete with bushes and washers for a direct replacement.
It is recommended that such parts be replaced as matched pairs.
|
RA017 |
£15.00 ex VAT
£18.00 inc VAT
|
|
Info
|
|
CV grease tub
|
A tub of CV grease for the CV joint on the Hilux pickup. Use one tub per hub when replacing the seals or CV joint. 500G
Do not use on front wheel bearings.
|
Si034 |
£4.75 ex VAT
£5.70 inc VAT
|
|
Info
|
|
Rear Wheel Stud
|
Rear Wheel Stud that the rear wheel bolts to.
Genuine Toyota stud as quality really counts on this component. |
RA010 |
£5.25 ex VAT
£6.30 inc VAT
|
|
Info
|
|
Rear anti roll bar D bracket L/H & R/H
|
Rear anti roll bar D bracket L/H and R/H are same. 2 required on rear axle. Sold individually. Often found to be cracked.
Genuine Toyota part. |
RA012 |
£7.50 ex VAT
£9.00 inc VAT
|
|
Info
|
|
Rear Anti-Roll bar "D" Bush 19 mm
|
19mm internal size Rear Anti-Roll bar "D" Bush, connects the rear anti-roll bar to the rear axle. L/H and R/H are the same. Please check the diameter of your rear anti-roll as we have noticed 2 sizes, 17mm and 19mm on the KZN185. The original bushes are actually marked with 19 on the outside.
Also fits KZJ95 & KDJ120 long wheel base models.
Genuine Toyota bush, sold individually.
We also supply a pair of urethane bushes as an alternative option, use SPB014.
|
RA014A |
£12.25 ex VAT
£14.70 inc VAT
|
|
Info
|
|
ABS Ring
|
ABS Ring for KZN185 and Mk5/6 pickup. Some customers and even garages have had difficulty removing this ring when changing the rear wheel bearing and have resorted to cutting the ABS ring off, RoughTrax, at request from customers have now descided to stock this ABS ring should it be reqired.
Genuine Toyota part.
|
RA024 |
£45.00 ex VAT
£54.00 inc VAT
|
|
Info
|
|
Axle Breather
|
Genuine Toyota Axle Breather which allows the axle to breathe and helps prevent blowing out of the seals. |
RA028 |
£6.95 ex VAT
£8.34 inc VAT
|
|
Info
|
|
Differential Pinion Flange Seal
|
Front and Rear Differential pinion flange seal. Fits behind where the prop bolts on to the pinion
flange.
|
FA004 |
£5.00 ex VAT
£6.00 inc VAT
|
|
Info
|
|
Differential Pinion Nut
|
Front and Rear Differential pinion nut. Fits where the prop bolts on to the pinion flange. |
TR011 |
£3.25 ex VAT
£3.90 inc VAT
|
|
Info
|
|
Rear Transfer Box Prop Shaft Output Flange Seal
|
Rear transfer box oil seal, this special Genuine Toyota oil seal fits into the housing where the rear prop bolts onto the flange. |
TR013 |
£11.50 ex VAT
£13.80 inc VAT
|
|
Info
|
|
Rear Diff Pinion Bearing Spacer
|
Genuine Toyota Rear Diff Pinion Bearing Spacer, Mk4/5/6, LN130 & KZN130. |
RA025 |
£15.00 ex VAT
£18.00 inc VAT
|
|
Info
|
|
Rear Diff Outer Pinion Bearing
|
Quality "Koyo" Rear diff Outer pinion bearing. Smaller of the two pinion bearings that is located behind the diff flange seal where the prop bolts on. |
TR018 |
£54.00 ex VAT
£64.80 inc VAT
|
|
Info
|
|
Rear Diff Inner Pinion Bearing
|
Quality "Koyo" Rear diff inner pinion bearing, largest of the two pinion bearings nearest the pinion gear. |
TR017 |
£31.00 ex VAT
£37.20 inc VAT
|
|
Info
|
|
4 Tonne Bottle Jack
|
A Double Ram 4 Tonne Bottle Jack.
Compact Double Ram bottle jacks are ideal for the Toyota as they compress to a very short length yet extend to a long length, perfect for jacking the axles and easy to stow away.
Spec;
Compress length 160mm
Extended length 380mm
|
ACC137 |
£21.00 ex VAT
£25.20 inc VAT
|
|
Info
|
|
Stainless Steel Compact Shovel
|
A Stainless Steel Compact Shovel comes complete with mounting bracket making it easy and safe to stow away, ideal for the snow etc.
Spec;
Overall length 650mm
Overall width 170mm |
ACC138 |
£17.95 ex VAT
£21.54 inc VAT
|
|
Info
|
|
WD40 - 450ml
|
•Cleans, protects, lubricates, penetrates & displaces moisture whilst protecting metal from rust and corrosion.
•Stops squeaks
•Frees sticky mechanisms
•Easy spray on application.
•New size aerosol
•All round releasing agent
•450ml Aerosol
|
WC027 |
£3.90 ex VAT
£4.68 inc VAT
|
|
Info
|
|
6 Tonne Axle Stands
|
A huge pair of 6 Tonne (6000kg) axle stands with easy height adjustment.
Spec;
Max lenth 601mm
Min length 383mm
Foot print 265mm x 240mm
Sold as a pair!
|
ACC141 |
£29.99 ex VAT
£35.99 inc VAT
|
|
Info
|
|
Silicone RTV Gasket Maker
|
Black Silicone RTV Gasket Maker
Vital Black RTV is the original gasket maker formulated for heavy duty applications. It makes reliable "ormed-in-place" gaskets that resist cracking, shrinking and migration caused by thermal cycling.
Ideal to replace almost any cut gasket. Also use to coats pre-cut gaskets to increase reliability.
It is permanently flexible and stable at temperature of between -80°c to +600°c (-62°c to +315°c ) intermittent.
It is also highly resistant to auto and shop fluids.
Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housing, transmission pans etc.Packaging Size: 3 oz. (85gm) tube carded, 2.47 oz. (70gm) tube carded
|
WC028 |
£3.99 ex VAT
£4.79 inc VAT
|
|
Info
|
|
110 Industrial Wipes
|
110 Industrial wipes developed for the professionals.
The Tygris OneWipe has been specifically developed for use by professionals in all trades. These large, strong and absorbent wipes conatain a powerful heavy-duty cleaner which is proven to remove tough stuff whilst remaining safe for use on hands.
OneWipe contains a lanolin based moisturiser which conditions the skin preventing dryness and cracking. No rinsing of hands is required making the OneWipe not only an excellent safe cleaner but also a convenient essential for tradesmen.
OneWipe will even clean Grease, Silicones & Sealants, Expanding Foam, Paint & Expoxies, Adhesives & more..
110 wipes in each container!! |
WC030 |
£5.99 ex VAT
£7.19 inc VAT
|
|
Info
|
|
LSD Gear Oil 90LS
|
1 Litre Limited slip diff (LSD) oil. Fuchs Titan Race Gear 90 LS (formerly known as Silkolene BOA 90 LS) is a high performance mineral based gear oil for hypoid and spiral bevel axles, which has excellent extreme pressure, anti-corrosion, antioxidation and anti-foam properties.
Fuchs Titan Race Gear was previously available under the Silkolene brand. Formerly known as Silkolene BOA 90 LS, this excellent gear oil has now been re-labeled as Fuchs Titan Race Gear 90 LS and offers the same outstanding formulation.
For Limited Slip Diffs Only.
API: GL-5 and GL-6 spec.
|
TR029 |
£7.50 ex VAT
£9.00 inc VAT
|
|
Info
|
|
80W-90 Gear Oil
|
1 Litre Genuine Toyota 80W-90 Gear Oil for Manual Transmission Gearboxes and Front & Rear differentials. Top quality oil as used by the Toyota dealerships.
API: GL-5
NOT FOR LIMITED SLIP DIFFS. |
TR030 |
£6.99 ex VAT
£8.39 inc VAT
|
|
Info
|
|
SuperPro Rear Anti-Roll Bar "D" Bushes 19mm
|
Super Pro polyurethane 19mm rear anti-roll bar “D” bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Please check you have 19mm "D" bushes fitted, the KZN185 was fitted with either 19mm or 17mm rear "D" bushes.
Sold as a pair!
For more technical info about Super Pro Polyurethane Bushes Click
Here! |
SPB014 |
£11.50 ex VAT
£13.80 inc VAT
|
|
Info
|
|
SuperPro Rear Anti-Roll Bar "D" Bushes 17mm
|
Super Pro polyurethane 17mm rear anti-roll bar “D” bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Please check you have 17mm "D" bushes fitted, the KZN185 was fitted with either 17mm or 19mm rear "D" bushes.
Sold as a pair!
For more technical info about Super Pro Polyurethane Bushes Click
Here! |
SPB016 |
£11.50 ex VAT
£13.80 inc VAT
|
|
Info
|
|
SuperPro Rear Anti-Roll Bar Bush Kit 19mm
|
Super Pro polyurethane 19mm rear anti-roll bar “D” bushes & link rod bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Please check you have 19mm "D" bushes fitted, the KZN185 was fitted with either 19mm or 17mm rear "D" bushes. Kit contains 2 “D” bushes & 4 link rod bushes.
For more technical info about Super Pro Polyurethane Bushes Click
Here! |
SPB015 |
£16.00 ex VAT
£19.20 inc VAT
|
|
Info
|
|
SuperPro Rear Anti-Roll Bar Bush Kit 17mm
|
Super Pro polyurethane 17mm rear anti-roll bar “D” bushes & link rod bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Please check you have 17mm "D" bushes fitted, the KZN185 was fitted with either 17mm or 19mm rear "D" bushes. Kit contains 2 “D” bushes & 4 link rod bushes.
For more technical info about Super Pro Polyurethane Bushes Click
Here! |
SPB017 |
£16.00 ex VAT
£19.20 inc VAT
|
|
Info
|
|
16mm Rear Anti Roll Bar Bushes
|
Super Pro polyurethane 16mm rear anti-roll bar “D” bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Please check you have 16mm "D" bushes fitted, 15-25mm "D" bushes could be fitted but we have found 16mm to be most popular.
Sold as a pair!
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB034 |
£12.75 ex VAT
£15.30 inc VAT
|
|
Info
|
|
Rear Anti Roll Bar Bush Kit
|
SuperPro Rear anti roll bar bush kit. (4 Piece) 1 kit fits both rear link rods. |
SPB036 |
£9.95 ex VAT
£11.94 inc VAT
|
|
Info
|
|
