Rear Coil Springs - 2" lift -Uprated
|
New Price; Rear Coil Springs for the Surf LN130/KZN130 and 4 Runner upto 1995. Uprated with approx 2" lift, these excellent quality new springs are from Sweden, renowned worldwide for their quality in spring steel material and manufacture. Ideal for towing, off and on road use, and over-coming the common Surf rear "suspension droop". Un-like many other manufacturers, our coil springs are handed left and right as are the original Toyota springs, this is due to road camber, and fuel tank weight on drivers side etc. Each spring is electronically tested after manufacture to meet specification. These excellent quality coils are ideal for towing, carrying extra weight, improving vehicle looks and handling, helping to prevent body roll in a bend. A truly superior product that will also fit with original fitment shocks. (Colours may vary from time to time)
TopTip! The taller of the 2 springs is always fitted to the drivers side rear.
Sold as a pair! |
SU005 |
£68.00 |
|
Info
|
Add |
Monroe Standard Gas Front Shock
|
Monroe Nitrogen Gas Front standard shock absorber, LN/KZN130 & 4Runner. Also fits Independent front suspension pickups Mk4/5 & LN107. An excellent quality product by a recognised manufacturer.
Not operated by the Hard/Soft switch if fitted but a direct replacement.
Image may not depict product.
Sold Individually!
|
SU038 |
£30.50 |
|
Info
|
Add |
Monroe Standard Gas Rear Shock
|
Monroe Nitrogen Gas rear shock absorber, standard height, LN/KZN130 & 4Runner. An excellent quality product by a recognised manufacturer.
Not operated by the Hard/Soft switch if fitted but a direct replacement.
Sold Individually! |
SU039 |
£32.50 |
|
Info
|
Add |
Monroe Gas 2" lifted Front Shock
|
Monroe Nitrogen Gas Front shock absorber with a 2" lift, LN/KZN130 & 4Runner. An excellent quality product by a recognized manufacturer. Not operated by the Hard/Soft switch if fitted but a direct replacement.
Suitable for 2" lifted Rear coils, use SU005 coils if required.
Sold Individually. |
SU046 |
£35.00 |
|
Info
|
Add |
Monroe Gas 2" lifted Rear Shock
|
Monroe Nitrogen Gas Surf rear shock absorber with a 2" lift. An excellent quality product by a recognized manufacturer. Not operated by the Hard/Soft switch if fitted but a direct replacement.
Suitable for 2" lifted Rear coils.
Sold Individually. |
SU047 |
£35.00 |
|
Info
|
Add |
Desert Fox Front Gas Shock- Standard Height
|
Desert Fox Front Gas Shock Absorber for standard height vehicles. Multidisk design for precision custom tuning and maximum damping. Nitrogen gas (up to 275 psi) and floating piston reduce fade up to 75% more than other shocks. Strong yet 10% lighter than most OEM shocks for better control. Huge 46mm bore reacts to bumps and absorbs impacts fast for a smoother ride. Chrome-plated hardened piston (20% larger than standard rods).
Sold Individually! Out of stock
Contact us for details
|
SU010 |
£37.50 |
|
Info
|
|
Desert Fox Rear Gas Shock- Standard Height
|
Desert Fox Rear Gas Shock Absorber for standard height vehicles. Multidisk design for precision custom tuning and maximum damping. Nitrogen gas (up to 275 psi) and floating piston reduce fade up to 75% more than other shocks. Strong yet 10% lighter than most OEM shocks for better control. Huge 46mm bore reacts to bumps and absorbs impacts fast for a smoother ride. Chrome-plated hardened piston (20% larger than standard rods).
Sold Individually! Out of stock
Contact us for details
|
SU012 |
£37.50 |
|
Info
|
|
2" Lift Desert Fox Front Gas Shock Absorber
|
2" Lift Desert Fox Front Gas Shock Absorber. Multidisk design for precision custom tuning and maximum damping. Nitrogen gas (up to 275 psi) and floating piston reduce fade up to 75% more than other shocks. Strong yet 10% lighter than most OEM shocks for better control. Huge 46mm bore reacts to bumps and absorbs impacts fast for a smoother ride. Chrome-plated hardened piston (20% larger than standard rods).
Sold Individually! Out of stock
Contact us for details
|
SU011 |
£37.50 |
|
Info
|
|
2" Lift Desert Fox Rear Gas Shock Absorber
|
2" Lift Desert Fox Rear Gas Shock Absorber. Multidisk design for precision custom tuning and maximum damping. Nitrogen gas (up to 275 psi) and floating piston reduce fade up to 75% more than other shocks. Strong yet 10% lighter than most OEM shocks for better control. Huge 46mm bore reacts to bumps and absorbs impacts fast for a smoother ride. Chrome-plated hardened piston (20% larger than standard rods).
Sold Individually! Out of stock
Contact us for details
|
SU013 |
£37.50 |
|
Info
|
|
Front Shock Absorber Genuine Adjustable Type
|
We are now stocking the Genuine Toyota Front adjustable gas type shock absorber which are operated by the "hard/soft" switch on the dashboard for the LN/KZN130 for customers who wish to keep to the original setup. The solenoid that operates the shock absorber is bolted to the top.
Sold Individually. |
SU014 |
£115.00 |
|
Info
|
Add |
Rear Shock Absorber Genuine Adjustable type
|
We are now stocking the Genuine Toyota Rear adjustable gas type shock absorber which is operated by the "hard/soft" switch on the dashboard for the LN/KZN130 for customers who wish to keep the original setup. The solenoid that operates the shock absorber is bolted to the top.
Sold Individually. |
SU015 |
£115.00 |
|
Info
|
Add |
Front Anti-roll bar kit
|
Front Anti-Roll bar uprated Urethane bush kit. Fits models with long bolt only that goes through the roll bar to the lower wishbone. Kit fits both sides and includes "D" bushes.
Kit contains;
2x "D" bushes
8x Small roll bar link bushes
8x Cup washers
2x Long bolts with nyloc nuts
2x Spacer tubes |
FA029 |
£19.95 |
|
Info
|
Add |
Front anti-roll bar "D" bush, LN130 / Mk4
|
Front rubber anti-roll bar "D" bush, LN130 / Mk4, genuine Toyota part, fitted where the anti-roll bar joins the chasis, L/H and R/H are the same.
Sold individually. |
FA034 |
£6.75 |
|
Info
|
Add |
Front Anti-roll bar bracket L/H
|
Front Anti-roll bar bracket L/H |
FA026 |
£3.00 |
|
Info
|
Add |
Front Anti-roll bar bracket R/H
|
Front Anti-roll bar bracket R/H |
FA027 |
£3.00 |
|
Info
|
Add |
Front anti-roll bar link rod
|
New price; 1x Front anti-roll bar link rod complete with the bushes and washers. Please check the view button to confirm you have this type of set up. |
FA024 |
£15.00 |
|
Info
|
Add |
Rear anti roll bar D bracket L/H & R/H
|
Rear anti roll bar D bracket L/H and R/H are same. 2 required on rear axle. Sold individually. Often found to be cracked. |
RA012 |
£7.50 |
|
Info
|
Add |
Rear anti-roll bar "D" bush L/H and R/H
|
Rear rubber anti-roll bar "D" bush, genuine Toyota, fits where the anti-roll bar joins to the rear axle. L/H and R/H are the same.
Sold individually.
|
RA011 |
£6.95 |
|
Info
|
Add |
Rear anti-roll bar link for LN/KZN130 models
|
Rear anti-roll bar link for LN/KZN130 models. This link fits to the outside of the anti-roll bar and goes to the bracket which bolts to the side of the chassis. LH and RH are the same. We sell them complete with the bushes and washers as a direct fitment.
|
RA005 |
£17.50 |
|
Info
|
Add |
Front Torsion Bar Bolt
|
IFS Torsion bar bolt and top nut. Long bolt approx. 8" Long that fits to the rear of the Torsion bar bracket to adjust front suspension. |
FA036 |
£8.00 |
|
Info
|
Add |
Genuine Front Lower Inner Wishbone Bush
|
Genuine Toyota Front Lower Inner Wishbone Bush, 2 are required for the lower arm each side (same bush), fits where the lower arm connects to the front subframe. Sold Individually.
If fitting standard type bushes then we only recommend the Genuine bush on the Import...they fit ! alternatively you can use the Polyurethane "SuperPro" kit SPB007. |
FA046 |
£36.00 |
|
Info
|
Add |
Front 2" Lifted Torsion Bars
|
Tried & Tested proven Australian lifted front torsion bars from Desert Fox. L/H & R/H torsion bars which will lift the Independent Front Suspension (IFS) by approx 2".
Use shock SU011 if required.
Sold as a pair! Out of stock
Contact us for details
|
SU035 |
£149.99 |
|
Info
|
|
Lower Ball Joint LH or R/H
|
New Price!
Quality Lower Ball Joint. Left hand & Right Hand are the same. Quality new replacement component that meets ISO 9000 standards.
WAS £20.00 |
ST018 |
£16.00 |
|
Info
|
Add |
Upper Ball Joint L/H or R/H
|
New Price!
Upper Ball Joint L/H or R/H are the same. Quality new replacement component that meets ISO 9000 standards.
WAS £24.95
|
ST019 |
£16.00 |
|
Info
|
Add |
Steering Damper for Independant front suspension ( IFS)
|
Heavy duty uprated Steering Damper for Independent front suspension (IFS) models. This damper has a larger upgraded piston and reservoir, helps prevent wheel shimmy and bump steer. Excellent for both on and off-road use, fits direct to original mounting points. Now sourced direct from Australia where they were designed, tried and tested.
Excellent Value
Out of stock
Contact us for details
|
ST022 |
£35.00 |
|
Info
|
|
3 Piece Stainless steel Brake line Kit ACC184
|
NEW Stainless steel 3 Piece High Performance Brake line Hose Kit, Eliminates Sponginess under heavy braking. Increases Braking efficiency. Abrasion and corrosion resistant. For Improved Performance and Response. These Race-Bred brake lines are constructed from the finest quality hose, consisting of a PTFE inner and Stainless Steel over-braid. For Independent front suspension models only. Brake lines have been made 1" longer than original rubber hoses, will suit standard and 2" lift vehicles only. |
ACC184 |
£37.99 |
|
Info
|
Add |
Heavy Duty Adjustable Panard Rod
|
Heavy Duty Adjustable Panhard Rod.
When a raised-height suspension system is applied to coil-sprung 4WD vehicles, the fixed length of the panhard rod can cause the axle to shift to one side.
Heavy duty adjustable panhard rods eliminate this problem. Enabling you, whatever your suspension type or lift, to set the rod to the most appropriate position. Suitable for all lifts. Out of stock
Contact us for details
|
LK013 |
£170.00 |
|
Info
|
|
LN/KZN130 Rear Bump Stop
|
Genuine Toyota Rear bump stop for coil spring. Fits models LN130, KZN130 & 4Runner. |
SU027 |
£29.00 |
|
Info
|
Add |
SuperPro Panhard Rod Bush Kit
|
Super Pro polyurethane Panhard rod bush kit contains both the bushes and one sleeve required to replace the original panhard rod rubber bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB011 |
£16.95 |
|
Info
|
Add |
Front Lower Wishbone Bush Kit
|
Super Pro polyurethane front lower wishbone bush kit complete with grease. This kit contains 4 lower Inner wishbone bushes & sleeves etc for both drivers & passengers side lower arms. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB007 |
£98.00 |
|
Info
|
Add |
Front Upper Wishbone Inner Bush Kit
|
Super Pro polyurethane front upper wishbone bush kit complete with grease. This kit contains 4 upper Inner wishbone bushes & sleeves etc for both drivers & passengers side upper arms. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB008 |
£98.00 |
|
Info
|
Add |
Complete Front Wishbone Bush Kit
|
Super Pro polyurethane complete front wishbone Upper & Lower bush kit complete with grease. This kit will replace all the upper and Lower inner suspension wishbone bushes both sides and comes complete with the necessary machined sleeves required to fit into the wishbones in order to fit Polyurethane bushes.
Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Kit Contains:
x1 Front Upper Wishbone Kit
x1 Front Lower Wishbone Kit
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB006 |
£190.00 |
|
Info
|
Add |
Rear Panhard Rod & Trailing Arm Bush Kit
|
Super Pro polyurethane rear panhard rod & trailing arm bush kit complete with grease. This kit contains both Panhard rod bushes and all 8 bushes and sleeves for all 4 rear Trailing arms. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB009 |
£125.00 |
|
Info
|
Add |
Rear Trailing Arm Bush Kit
|
Super Pro polyurethane rear trailing arm bush kit complete with grease. This kit contains all 8 bushes and sleeves to replace all 4 rear Trailing arms. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB010 |
£108.00 |
|
Info
|
Add |
SuperPro Front Anti-Roll Bar "D" Bushes
|
Super Pro polyurethane front anti-roll bar “D” bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability. Sold as a pair!
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB001F |
£10.50 |
|
Info
|
Add |
SuperPro Front Anti-Roll Bar Bush Kit
|
Super Pro polyurethane front anti-roll bar “D” bushes & link rod bushes complete with washers, nuts and grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Kit contains;
x2 Anti-Roll Bar “D” Bushes
x4 Anti-Roll Bar Link Rod Bushes.
x4 Cup Washers
x2 Nuts
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB002F |
£16.00 |
|
Info
|
Add |
SuperPro Rear Anti-Roll Bar "D" Bushes
|
Super Pro polyurethane rear anti-roll bar “D” bushes complete with grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability. Sold as a pair!
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB001R |
£10.50 |
|
Info
|
Add |
SuperPro Rear Anti-Roll Bar Bush Kit
|
Super Pro polyurethane rear anti-roll bar “D” bushes & link rod bushes complete with washers, nuts and grease. Offering a cost effective 3 Year Guarantee. Fitting polyurethane bushes will ensure that the suspension components retain their designed geometry giving better handling & steering response, longer component & tyre life and an improved ride quality over worn rubber bushes. Super Pro are not copies of the original rubber component they are specially developed to take advantage of the material’s unique properties lasting significantly longer than the equivalent rubber component. Low Maintenance, Cost Efficient, Less Wander, Responsive Steering, Control & improved Stability.
Kit contains:
x2 Anti-Roll Bar “D” Bushes
x4 Anti-Roll Bar Link Rod Bushes.
x4 Cup Washers
x2 Nuts
For more technical info about Super Pro Polyurethane Bushes Click Here! |
SPB002R |
£16.00 |
|
Info
|
Add |
