Front Disc & Pad Kit Mk2
|
Mk2 Hilux Pickup Disc & Pad Kit.
BR001 x2 - Front Solid Brake Discs
BR004 x1 - Front Brake Pads (Non Gen)
This kit contains the most commonly purchased front brake components. (Picture showing vented disc not solid)
SAVING 6.5% |
BR001KIT |
£56.00 |
|
Info
|
Add |
Mk2 Pad & Shoe Kit
|
Mk2 Pad & Shoe Kit 1984-1988.
BR004 x1 - Front Brake Pads (Non Gen)
BR009 x1 - Rear Brake Shoes
This kit contains non genuine front brake pads for solid brake discs and Rear brake shoes for the Mk2 Hilux Pickup 1980-1988.
|
PSK001 |
£42.00 |
|
Info
|
Add |
Front Brake Disc Solid Mk2
|
Front Disc Solid, Excellent quality. 1980 -88. Sold individually.
Quality Tip! At RoughTrax we will only supply our highest quality component at our best price, particularly when brakes and safety are involved, this is why we will only supply quality manufactured discs from initial casting to finished machined product that offers effective and efficient braking. Quality discs will offer less brake fade and better resistance to heat and disc warp under heavy braking, therefore the high standards and materials used throughout brake disc manufacture ensure that lasting efficiency and total quality that are built into every disc that we supply. |
BR001 |
£22.00 |
|
Info
|
Add |
Front Pads Mk2 1979 - 88 (Solid Disc)
|
Front Pads, non genuine. One set fits both calipers. 1979 - 88 (Solid Disc) |
BR004 |
£16.00 |
|
Info
|
Add |
Front Pads Genuine Mk2 for solid disc
|
Front Pads Genuine for solid disc. One set fits both calipers. 1979 - 88 |
BR005 |
£42.50 |
|
Info
|
Add |
Rear Brake Shoes 1979 - 88 BR009
|
Quality Rear Brake Shoes. 1 set Fits both drums. 1979 - 88 |
BR009 |
£26.95 |
|
Info
|
Add |
Rear Shoe Retainer Kit All Models
|
Rear brake shoe fitting kit, contains rear Shoe retainer Pins, Cups, springs, handbrake lever C clips etc, excellent value for the content of this full kit. Fits all 4 rear shoes on all Models (on the older Mk2 pickup's the main springs at the bottom of the image are not used). |
BR017 |
£13.50 |
|
Info
|
Add |
Rear Brake Drum for mk2 (each) 1979 - 88
|
Rear Brake Drum for mk2. (each)
1979 - 88 |
BR037 |
£30.00 |
|
Info
|
Add |
Rear Wheel Cylinder 1979 - 88
|
Rear Wheel Cylinder
1979 - 88 |
BR013 |
£14.00 |
|
Info
|
Add |
Brake Pedal Rubbers
|
Pedal Rubbers for brake and clutch 1979 - Onwards (Pair) |
BR036 |
£6.00 |
|
Info
|
Add |
Front Handbrake Cable 1984 - 1997
|
Front Handbrake Cable, from handbrake handle to link in front of fuel tank where it joins to rear cable 1984 - 1997 |
BR028 |
£18.00 |
|
Info
|
Add |
Rear Handbrake Cable 1984 - 7/1997
|
Rear Handbrake Cable from link in front of fuel tank back and across axle to both drums 1984 - 7/1997 |
BR032 |
£24.00 |
|
Info
|
Add |
Front Flexi brake hose 1979-7/1997
|
Front Flexi rubber brake hose L/H and R/H are the same 1979 - 7/1997.
Sold individually. |
BR039 |
£10.00 |
|
Info
|
Add |
Rear Flexi Brake Hose 1984 - 7/1997
|
Rear flexi rubber brake hose 1984 - 7/1997. There is only one fitted in the middle of the axle to the chasis on the rear. |
BR040 |
£11.00 |
|
Info
|
Add |
Braided brake hose kit
|
Goodrich Stainless braided extended brake hose kit with all three hoses and fittings. Exceptional quality and improved brake pedal. Approx. 3 1/2" longer than standard, will fit standard height truck as well. Fits: Mk2, Mk3 & LN106.
|
LK003 |
£39.95 |
|
Info
|
Add |
Rear compensator/Load sensor valve bracket
|
Rear compensator / load sensor valve bracket that often corodes, the compensator valve bolts to this bracket, then the bracket bolts to the chassis with 4 bolts. Aids the fitting of the new valve, or is often required for an MOT. |
BR034 |
£10.50 |
|
Info
|
Add |
Brake Cleaner
|
Genuine Toyota Brake Cleaner. contains non-chlorinated solvents. Removes brake fluid, oil and other greases from metal parts. Stops annoying brake squeal and chatter and is quick drying with no residue. A must on every service, especially when dealing with brake dust! |
WC001 |
£3.50 |
|
Info
|
Add |
Dot 4 Brake Fluid
|
500ml of Dot 4 Brake fluid, a synthetic brake and clutch fluid, mostly specified for Disc Brake systems, giving high performance and protection exceeding FMVSS 116 Dot 3 and SAEJ 1703 specifications. It will mix safely with other brake fluids. Dot 4 can be used in Dot 3 applications as the spec exceeds Dot 3.
Manufacturer may vary due to supply. |
WC007 |
£2.75 |
|
Info
|
Add |
