Part Number: SUHW011
A tried & tested pre-assembled Monroe Adventure shock with Pedders Coils 40mm suspension lift kit for Hilux Surf 185 models & Land Cruiser 90 series.
Whilst improving the vehicle's looks and handling, RoughTrax Monroe Adventure shocks with Pedder's Coils lift kit helps keep cost down whilst maintaining quality branded components.
Shock absorbers are not as firm as the larger Pedders piston shocks so ride tends to be a little softer than that of a full Pedders suspension kit.
Again, Ideal for towing, off-road & on-road use whilst giving greater ground clearance allowing fitment of larger tyres.
Coil springs are manufactured in Australia by Pedders & tried and tested in the outback terrain.
Fitting Tip - Only torque the lower shock bolt when the weight is back down on the vehicle - NOT when the suspension is hanging down.
With this kit, RoughTrax has taken the strain out of building up both handed front struts. With our coil compressing equipment, we've fitted the coil to the shock and aligned the new heavy-duty Pedders top mounting plates to the shock lower mounting ready for you fit, this means correct installation is made easy so in turn will definitely save you on Labour fitting costs.
An affordable and comprehensive kit!
Our kit Contains:
For the Front - Come pre-assembled Struts (LH & RH) ready to bolt on and made up of:
- x2 Monroe Adventure Gas Front Shock Absorber Struts
- x2 Pedders Front Lift Coil Springs Uprated - 605 Lbs/In
- x2 Pedders Heavy Duty Uprated Front Top Mounts.
and for the Rear:
- x2 Monroe Adventure Gas Rear Shock Absorbers
- x2 Pedders Rear Lift Coil Springs Uprated - 194 Lbs/in
The amount of lift can vary pending original vehicles bushes etc, below will provide you with a good idea of the ride height after installing the lift kit, from this you can determine the lift the kit will give you against your existing ride height: Vehicle will sit higher at the rear than front as the front is limited by the ball joint and driveshafts.
Ride heights are taken from the bottom of the wheel rim vertically up to the wheel arch: -
Ride heights are provided from a standard model Hilux Surf KZN185 without any other modifications.
Wheel diameters will affect this ride height so we have provided dimensions with 2 common wheel sizes -
you can adjust dimensions by 12.5mm (1/2") accordingly if running different size wheels.
Front ride height: - bottom of rim up to arch: - usually a 10mm discrepancy
15" rims = 737.5mm
16" rims = 750mm
Rear ride height: - bottom of rim up to arch: - usually a 10mm discrepancy
15" rims = 775mm
16" rims = 787mm
(SWB 90 L/Cruisers may lift approx 20mm more at rear)
Brand / Manufacturer: Monroe
MPN (Manufacturer Part Number): LK012
Fitting Position: Suspension, front & rear.
Unit of Sale: 1 Kit
Front Coils - 605 Lbs/in
Rear Coils - 194 Lbs/in
Toyota Hilux Surf 3rd Gen KZN185 3.0cc (1KZTE) Turbo Diesel RHD (N - W reg, 1995-2000) Japanese
Toyota Hilux Surf 3rd Gen RZN185 2.7cc (3RZFE) Petrol RHD (N - 52 reg, 1995-2002) Japanese
Toyota Hilux Surf 3rd Gen VZN185 3.4cc (5VZFE) V6 Petrol RHD (N - 52 reg, 1995-2002) Japanese
Toyota Land Cruiser 90 Series KZJ90 (SWB) 3.0cc (1KZTE) Turbo Diesel RHD (N - W reg, 1996-2000) UK & Japanese
Toyota Land Cruiser (Colorado & Prado) 90 Series KZJ95 (LWB) 3.0cc (1KZTE) Turbo Diesel RHD (N - 52 reg, 1996-2002) UK & Japanese
Toyota Land Cruiser (Colorado & Prado) 90 Series VZJ90 (SWB) 3.4cc (5VZFE) V6 Petrol RHD (N - 52 reg, 1996-2002) Japanese
Toyota Land Cruiser (Colorado & Prado) 90 Series VZJ95 (LWB) 3.4cc (5VZFE) V6 Petrol RHD (N - 52 reg, 1996-2002) Japanese
Toyota Land Cruiser (Colorado & Prado) 90 Series KDJ90 (SWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (W - 52 reg, 2000-2002) UK & Japanese
Toyota Land Cruiser (Colorado & Prado) 90 Series KDJ95 (LWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (W - 52 reg, 2000-2002) UK & Japanese
Q. Is there an adjustable rear Panhard rod available?
A. Unfortunately not from Pedders or any companies that we have dealt with in the past.
When any vehicle with a rear Panhard rod is lifted, the rod will pull the axle slightly to one side by approx 1/2", in order to overcome this (should you want too and most customers don't seem to worry about it) you will have to modify the Panhard rod yourself.
The main lower bush mounting bolt must only ever be tightened to its torque when, the vehicle is sat back down on the ground for example, i.e with the weight on.
If the bolt is tightened, for example on a ramp with suspension hanging, then when the vehicle is lowered and the weight applied, the bush is instantly twisted and of course, over time will crack and fail.
Part Number: WC027£4.99 ex VAT
Part Number: ACEL06£3.50 ex VAT
Part Number: WC032£2.99 ex VAT
Part Number: WC001£1.25 ex VAT
Part Number: WC005£4.50 ex VAT
Part Number: TOOL10£5.99 ex VAT
Part Number: WC015£2.75 ex VAT