Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Black Anodised Aluminium 30mm Wheel Spacers - Qty 4
Choose your vehicle to ensure compatibility | Choose Vehicle |
Add to Wishlist
Order by 15:00 mon-fri for same day dispatch.
28 Day returns or exchange.
1 Year Parts Warranty
Set of four, Black 30mm wide solid billet aluminium wheel spacers. Machined from one piece of solid billet aluminium. Each spacer is fitted with 6 high tensile studs that your original wheel will bolt to using your original wheel nuts, and 6 new nuts to bolt the spacer to the hub as pictured in the product images. This effectively extending the hub by 30mm - PCD: 6 x 139.7.
Fitting:
- Never use Air guns when fitting spacers to hub or wheel to spacer.
- Always ensure wheels and spacers are torqued to original vehicle wheel specification
- Always check that you have sufficient threads holding the spacer to the hub and that the stud is protruding through the nut - if in doubt use the extended stud option as per images.
- As with any component, once fitted always ensure all components are torqued correctly and that every part is secure.
- As when fitting any wheel always check torques after a few miles
- Not Hub-Centic design - The 6 tapered nuts provided with the spacers centralise the spacer.
Wheel spacers are usually fitted on 4x4's to increase the vehicle track width which is ideal to stabilise lifted vehicles as well as to ensure aftermarket or alternative alloy wheels fit correctly without fouling any suspension, steering, hub or braking components.
What to check:
- Does your vehicle need extended front studs? - Please see note below
- Does your vehicle have clearance on the bodywork when on full lock? - Please see note below
As a tip, prior to ordering pull your wheel away from your hub by 30mm to mimic a spacer and turn from lock to lock to ensure you have sufficient clearance to bodywork.
Extended Front Wheel Stud Information;
As many people are aware, certain models have a very short original front wheel stud, this is mainly due to the fact that Toyota use a wheel nut with a shank fitting allowing the nut to recede into the wheel giving a good purchase.
Wheel spacers use a taper nut system to bolt the spacer to the hub, this means that on certain models the stud does not protrude all the way through the nut which isn't ideal in our opinion.
With safety in mind, we have therefore taken the decision to supply the option of the spacers with 12 new extended front wheel studs which should be fitted to the hub prior to fitting the spacer, if you require the extended stud kit simply tick the box option above the orange "add to basket" button.
The new extended studs we supply are of universal length, 62mm long including the spline, 67mm overall and made of High-Grade 30MnB3 high tensile steel, 10.9 in tensile strength, thread size 12mm x 1.5mm as per standard. The extended studs will require cutting to length for the specific vehicle the spacers are being fitted to.
Due to short supply we can ONLY supply studs to those customers that have purchased spacers from RoughTrax.
If you fit the spacer first and measure the extra length you will require you can then cut the studs to your required length prior to fitting.
Remember, always a good idea to cut one and fit first to make sure you have measured correctly!
The vehicles we are aware of that will/might (depending on wheel type) require extended wheel studs are;
Hilux Pickups from 2005-ON (Mk6, Mk7 & Mk8)
Hilux Surfs from 1996-2003 (KZN185, RZN185 & VZN185)
Land Cruiser 90 series, 120 series, 150 series
(but always check with any model that upon fitting that you have sufficient stud protruding through the nuts - we can always supply extra studs after if required)
Weight | 6.060000 |
---|---|
Dimensions | 30mm |
Manufacturer | Soong |
MPN (Manufacturer Part Number) | WS-6-139-1 |
Warranty Options | 1 Year Parts Warranty |
Fitting Position | Hub |
Unit of Sale | Set of four (two pairs) |
Specs & Fitment | PCD: 6 x 139.7 Thread: 12mm x 1.5mm Spacer Stud Length: 32mm Inner Diameter: 108mm Outer Diameter: 176mm Width: 30mm Quantity: 4 Extended Front Wheel Stud Dimensions; (You will need to cut the stud to the required length) |
Vehicle Compatibility
Below are a list of compatible vehicle for this product.
- Toyota Hilux Pickup LN65R 2.4cc (2L) Diesel RHD (A - F reg, 8/1983-7/1988) UK Mk2
- Toyota Hilux Pickup YN65R 2.0cc (3Y) Petrol RHD (A - D reg, 8/1983-8/1985) UK Mk2
- Toyota Hilux Pickup YN67R 2.2cc (4Y) Petrol RHD (C - L reg, 8/1985-7/1988) UK Mk2
- Toyota Hilux Pickup LN105R 2.4cc (2L) Diesel RHD (F - R reg, 8/1988-7/1997) UK Mk3
- Toyota Hilux Pickup YN106R 2.2cc (4Y) Petrol RHD (F - R reg, 8/1988-8/1997) UK Mk3
- Toyota Hilux Pickup LN106 2.8cc (3L) Diesel RHD (F - R reg, 8/1988-8/1997) Import
- Toyota Hilux Pickup LN107 2.8cc (3L) Diesel RHD (J - R reg, 8/1991-8/1997) Import
- Toyota Hilux Pickup LN109 2.8cc (3L) Diesel RHD (F - R reg, 8/1994-8/1997) Import
- Toyota Hilux Pickup LN110L 2.4cc (2L) Diesel LHD (F - R reg, 1988-1997) Import Mk3
- Toyota Hilux Pickup LN165R 2.4cc (2LT) Turbo Diesel RHD (R - Y reg, 8/1997-7/2001) UK Mk4
- Toyota Hilux Pickup LN166R 2.8cc (3L) Diesel RHD (R - 06 reg, 8/1997-2006) Import
- Toyota Hilux Pickup LN167 3.0cc (5L) Diesel RHD (R - 05 reg, 8/1997-7/2001) Import
- Toyota Hilux Pickup LN172 3.0cc (5L) Diesel RHD (R - 05 reg, 8/1997-7/2004) Import
- Toyota Hilux Pickup KZN165 3.0cc (1KZTE) Turbo Diesel RHD (V - 54 reg, 9/1999-2005) Import
- Toyota Hilux Pickup KDN165R 2.5cc (2KDFTV) Turbo Diesel (D4D) RHD (51 - 55 reg, 8/2001-7/2005) UK Mk5
- Toyota Hilux Pickup KUN25R 2.5cc (2KDFTV) Turbo Diesel (D4D) RHD (55 - 61 reg, 7/2005-8/2011) Mk6
- Toyota Hilux Pickup KUN26R 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (56 - 61 reg, 10/2006-8/2011) Mk6
- Toyota Hilux Pickup KUN25R 2.5cc (2KDFTV) Turbo Diesel (D4D) RHD (61 - 66 reg, 7/2011-2016) Mk7
- Toyota Hilux Pickup KUN26R 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (61 - 66 reg, 7/2011-2016) Mk7
- Toyota Hilux Pickup GUN125R 2.4cc (2GD-FTV) TD (D4D) RHD (4/2016-01/2023) Mk8
- Toyota Hilux Surf LN130 2.4cc (2LT) Turbo Diesel RHD/LHD (F - L reg, 1988-8/1993) Import
- Toyota Hilux Surf KZN130 3.0cc (1KZTE) Turbo Diesel RHD (L - N reg, 8/1993-11/1995) Import
- Toyota Hilux Surf VZN130 3.0cc (3VZE) V6 Petrol RHD (H - N reg, 8/1993-11/1995) UK/Import
- Toyota Hilux Surf KZN185 3.0cc (1KZTE) Turbo Diesel RHD (N - W reg, 11/1995-8/2000) Import
- Toyota Hilux Surf RZN185 2.7cc (3RZFE) Petrol RHD (N - 52 reg, 11/1995-11/2002) Import
- Toyota Hilux Surf VZN185 3.4cc (5VZFE) V6 Petrol RHD (N - 52 reg, 11/1995-11/2002) Import
- Toyota Hilux Surf 4Runner KZN130 3.0cc (1KZT) Turbo Diesel RHD (L - N reg, 8/1993-11/1995) UK
- Toyota Land Cruiser LJ70R 2.4cc (2LT) Turbo Diesel RHD (D - G reg, 1986-1/1990) UK
- Toyota Land Cruiser LJ70R 2.4cc (2LT) Turbo Diesel RHD (G - K reg, 1/1990-5/1993) UK
- Toyota Land Cruiser LJ71 2.4cc (2LT) Turbo Diesel RHD (C - G reg, 1986-1/1990) Import
- Toyota Land Cruiser LJ71 2.4cc (2LTE) Turbo Diesel RHD (G - K reg, 1/1990-5/1993) Import
- Toyota Land Cruiser LJ78 2.4cc (2LTE) Turbo Diesel RHD (G - K reg, 4/1990-5/1993) Import
- Toyota Land Cruiser KZJ70R 3.0cc (1KZT) Turbo Diesel RHD (K - N reg, 5/1993-4/1996) UK
- Toyota Land Cruiser HDJ80R 4.2cc (1HDT) Diesel (12 Valve) RHD (G - L reg, 1/1990-7/1994) UK
- Toyota Land Cruiser HDJ80R 4.2cc (1HDFT) Diesel (24 Valve) RHD (M - S reg, 1/1995-1/1998) UK
- Toyota Land Cruiser HDJ81 4.2cc (1HDT) Diesel (12 Valve) RHD (G - M reg, 1/1990-1/1995) Import
- Toyota Land Cruiser HDJ81 4.2cc (1HDFT) Diesel (24 Valve) RHD (M - S reg, 1/1995-1/1998) Import
- Toyota Land Cruiser FZJ80 4.5cc (1FZFE) Straight-6 Petrol (EFI) RHD (K - S reg, 1/1990-1/1998)
- Toyota Land Cruiser KZJ90R (SWB) 3.0cc (1KZTE) Turbo Diesel RHD (N - W reg, 4/1996-7/2000)
- Toyota Land Cruiser KZJ95R (LWB) 3.0cc (1KZTE) Turbo Diesel RHD (N - 52 reg, 4/1996-7/2000) Import
- Toyota Land Cruiser VZJ90R (SWB) 3.4cc (5VZFE) V6 Petrol RHD (N - 52 reg, 4/1996-7/2000) Import
- Toyota Land Cruiser VZJ95R (LWB) 3.4cc (5VZFE) V6 Petrol RHD (N - 52 reg, 4/1996-7/2000) Import
- Toyota Land Cruiser KDJ90R (SWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (W - 52 reg, 8/2000-9/2002)
- Toyota Land Cruiser KDJ95R (LWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (W - 52 reg, 8/2000-9/2002)
- Toyota Land Cruiser KDJ120R (LWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (52 - 09 reg, 9/2002-12/2009) Prado
- Toyota Land Cruiser KDJ125R (SWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (52 - 09 reg, 9/2002-12/2009) Prado
- Toyota Land Cruiser KDJ150R (LWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (09 - 64 reg, 8/2009 onwards) UK
- Toyota Land Cruiser KDJ155R (SWB) 3.0cc (1KDFTV) Turbo Diesel (D4D) RHD (09 - 64 reg, 8/2009 onwards) UK
- Toyota Hilux Pickup GUN126R 2.8cc (1GD-FTV) TD (D4D) RHD (4/2016-01/2023) Mk8
- Toyota Land Cruiser GRJ120R (LWB) 4.0cc (1GRFE) Petrol (52 - 09 reg, 1/2003-12/2009) Prado
SERVICE KITS for your Toyota
You have not selected a Toyota model to filter these products yet.
Delivery Information - Cut-off Time 15:00 Monday-Friday
> Click here for our Opening Hours and Delivery Times
Free Delivery - Orders Over £90 (Online Orders Only / 2-5 day service) subject to Terms & Conditions*
At checkout enter your delivery Postcode - the available options and charges will be provided depending on the product and location prior to any purchase.
*Excludes Islands and some Scottish postcodes where surcharges apply, click here for exclusions. Free delivery is not valid on any telephone order.
PLEASE NOTE: Orders placed before 15:00 weekdays will be dispatched on the same day subject to stock and points below. Orders placed after 15:00 on Friday or over the weekend will be dispatched on the following Monday.
If you wish to make any additions or alternations to your initial order you will need to let us know before 12.00 noon.
We are closed over Bank Holidays.
For full details please visit to our Deliveries page.
International Delivery – Cut-off 12 Noon Monday-Friday
RoughTrax offers fast, reliable, and affordable service as standard, we make sending your international order easy with an online tracking system sent straight to your email once despatched.
To confirm a delivery price simply add products to your basket, select your country and enter your postcode in the delivery field. The website will automatically calculate your delivery price. Goods can be sent worldwide.
All International orders are sent with FedEx, Parcelforce or DHL depending on the product/s & service you have selected.
For full details please visit our International Deliveries page.
Arrange Own Courier
If a delivery method is not available, an option of “Arrange My Own Courier” will display. This enables you to order through the website and arrange your own courier for your goods to be collected directly from RoughTrax in Bristol, UK.
For full details please visit to our Arrange My Own Courier page.
Returns
At RoughTrax we know that sometimes you will need to return items.
- All products must be re-sellable and returned along with the original packaging and documents. (Stock to order or Special order items are non-returnable).
- Goods must be returned within 28 days of purchase as per our Terms and Conditions
- Products must be returned to RoughTrax at RoughTrax Ltd, Units 4-7 Pixash Business Centre, Pixash Lane, Keynsham, Bristol. BS31 1TP United Kingdom
If Returned parts that qualified for Free Delivery.
If you return a product(s) that qualified you for Free Delivery and the remainder of your order does not exceed the £90 Free Delivery Promotion, then RoughTrax reserve the right to charge carriage for the remaining products purchased to cover the carriage cost.
Please visit our Returns page to download a returns form and for further information.
Product Reviews for Black Anodised Aluminium 30mm Wheel Spacers - Qty 4
Questions & Answers for Black Anodised Aluminium 30mm Wheel Spacers - Qty 4
Q. Do I need Extended Front Studs or not?
A. The vehicles we are aware of that will/might (depending on wheel type) require extended wheel studs are;
Hilux Pickups from 2005-ON (Mk6 & Mk7's)
Hilux Surfs from 1996-2003 (KZN185, RZN185 & VZN185)
Land Cruiser 90 series, 120 series & 150 series.
(but always check with any model that upon fitting that you have sufficient stud protruding through the nuts - we can always supply extra studs after if required)
As many people are aware, certain models have a very short original front wheel stud, this is mainly due to the fact that Toyota use a wheel nut with a shank fitting allowing the nut to recede into the wheel giving a good purchase.
Wheel spacers use a taper nut system to bolt the spacer to the hub, this means that on certain models the stud does not protrude all the way through the nut which isn't ideal in our opinion.
With safety in mind, we have therefore taken the decision to supply the option of spacers with 12 new extended front wheel studs which should be fitted to the hub prior to fitting the spacer, if you require the extended stud kit simply tick the box option above the orange "add to basket" button.
The new extended studs we supply are of universal length, 62mm long including the spline, 67mm overall and made of High-Grade 30MnB3 high tensile steel, 10.9 in tensile strength, thread size 12mm x 1.5mm as per standard. The extended studs will require cutting to length for the specific vehicle the spacers are being fitted to.
If you fit the spacer first and measure the extra length you will require you can then cut the studs to your required length prior to fitting.
Remember, always a good idea to cut one and fit first to make sure you have measured correctly.
Q. Can I purchase studs separately?
A. We can only supply extended studs to those customers that have purchased spacers from RoughTrax - this is due to the short supply.